Overview
Introduction
The TS700 intruder alarm control system is provided for
domestic and commercial intruder alarm systems
conformingtoBS4737:part1:1986. Thesystemconsists
of a control panel and at least one remote keypad.
Control Panel
The control panel is the controlling unit for the alarm
system with its own power supply and an internal battery
(supplied separately) for use during a mains failure.
It has the following facilities:
l
Eight programmable detection circuits
l
Bell and strobe output
l
Four programmable high current outputs
l
Eight programmable digicom outputs
l
Connection for a plug-on digicom
l
Extension loudspeaker output (16 Ohms)
l
1.5 Amp power supply
l
All system data stored in a Non-Volatile memory
(NVM)
Remote Keypads and LECs
The TS700 system will accept three types of remote
keypads: The NETLED remote keypad hasa4x7
segment LED display and a power indicator. The
NETSTAR remote keypad has a 8 character LCD display
and a power indicator. The NETARM remote arming
keypad has a power indicator and a programmable
function LED. The Local Expansion Card (TS700.LEC)
provides the means of adding two detection circuits
without the need of using a remote keypad. All device
types can be used on the same system, providing the
total does not exceed four. Each device provides the
following facilities:
l
Two programmable detection circuits
l
A programmable output
Options
AdditionalequipmentmaybeconnectedtotheTS700:
l
A plug-on digital communicator type DC54 or
DC58 can be fitted inside the control panel to
transfer panel status information to a dedicated
alarm receiving centre via the BT network
l
Othertypesofdigitalcommunicators,RedCARESTU
or Paknet interface card can be connected to the
control panel to transfer panel status information to
a dedicated alarm receiving centre via the BT
network
l
AprintertypeCPA6.P(obsolete)orastandardRS232
serial printer via a Menvier Security Printer Adaptor
(MPA/DCI) can be connected to provide a printout
of the 200 log events and system parameters.
l
An output module type CPA6.OM can be
connected to provide an output to a set of
LEDs/relays to indicate circuit activation. Each
module will provide up to eight circuit indications
andtwomodulescanbe"daisychained"toprovide
up to sixteen outputs.
TS700 2of10 496511 Issue A
TS700
(48 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals