Menvier Security SD1 User Manual download pdf (Page 4)

Overview

Connections

The SD1+ is connected between the alarm

control panel and the telephone line. It

behaves like another extension to the

telephone and does not affect the normal

operation or that of any other extensions fitted.

However, if the SD1+ is operating, and any

telephone handset is lifted, the messages will

be heard. The unit requires no batteries as its

power is derived from the alarm control panel.

The SD1+ can accept up to four inputs which in

our example are; A - fire, B - Personal Attack

(PA), C - burglary and D - Auxiliary. These inputs

correspond to messages (A, B, C or D) that the

SD1+ sends out and should be recorded as

such. The SD1+ can also accept a direct

connection from suitable auxiliary devices

such as radio PA buttons, medical alarms or

anything using volt free contacts. The abort

input is used as trigger D. See page 6.

Passcode

The SD1+ requires a passcode to be entered

to gain access to all of the programming

menus, this code can also be used to cancel

an activation if the unit has been accidentally

triggered . See page 4.

Passcode Type

The passcode that is required by the SD1+ to

enter into the programming menus, can be

modified so that it is either a standard 4 digit

code, or a 6 digit code. See page 5.

Programmable Output

The SD1+ has a programmable output that is

capable of supplying up to 100mA of current.

This output can be programmed to activate

when the SD1+ has been triggered, when the

SD1+ has been successfully acknowledged, or

when the SD1+ has failed to communicate to

all telephone numbers. See page 5.

Call Routing

The SD1+ can be programmed so that each

trigger input A, B, C or D will only dial a certain

telephone number. This can be used for when

the dialler is required to call four different

numbers under three different conditions e.g.

trigger A will only dial telephone number 1,

trigger B will only dial telephone numbers2&3

whereas trigger C will dial telephone numbers 1,

2, 3 & 4. See page 6.

Control Panel

Speech Dialler

Telephone

Auxiliary

Input

BT Line

Tel No 2

Tel No 3

Tel No 4

Tel No 1

ENT

ESC

SD1+

HOME

AWAY

3 4

UNSET TAMPER FINAL

EXIT

This product is manufactured to meet all European Economic Area Tele-communication networks requirements.

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments

Menvier Security SD1 User Manual Page 4

Comments to this Manuals

Related products and manuals for Door intercom systems Menvier Security SD1