Menvier Security TS700 Instruction Manual download pdf (Page 21)

6. Select new setting mode by pressing:

1 fo r Final Exit

2 fo r Exit Terminator

3 fo r Timed Exit

0 to `toggle' between all three options

7. When the display shows the require d setting press [ to accept.

The display will return to step 3. Repeat steps 4 to 7 for the

remaining setting groups .

8. Press ] to return to "Engineer Menu 1".

When using partsetcodesto setareas,the firstarea that is setwillfollow t he setting mode

define d by that area. Any subsequent areas will always use the timed exit method.

System Print

A print-out of all system parameters may b e obtained so that a permanent record of the system

program details may be kept.

1. Ensure that "Engineer Menu 1 " is selected .

2. Press 7 to select the System Print option.

3. The display will show the line that is being printed (Ln01).

4. Press ] to stop pri nting and return to "Engineer Menu 1".

Remote Reset Algorithm

When the system requires an Engineer Reset th is may be over ridden by using the Remote Reset

facility. To provide additional security the way in which th e "Reset Code" is generat ed can be

selected to b e one of 199 algorithms (default=004).

1. Ensure that "Engineer Menu 1 " is selected .

2. Press 8 to select the Reset Algorithm option.

3. The display will show the current setting.

4. Enter the new number and press [ to accept.

System Conf iguration

There are ten system configuration options which are shown in Table 6.

1. Ensure that "Engineer Menu 1 " is selected .

2. Press 9 to select the System Conf iguration option.

3. The display will show: con.-

4. Enter the required configuratio n number 0 to 9.

5. The display will show the current setting. Press 0 to "toggle"

between YES and NO. Press [ to accept.

6. The display will return to step 3. Repeat steps 4 to 6 for the

remaining system configuration options.

7. Press ] to return to "Engineer Menu 1".

TS700 Installation Manual Programming

Ln01

Press ESC to cancel printing.

004

Ent er new numbe r 000 - 199.

con.-

Ent er configuration number 0- 9

(see Table 6 ).

YES

Press 0 to `toggle' the option

between YES or NO.

(see Table 6 ).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comments to this Manuals

No comments

Menvier Security TS700 Instruction Manual Page 21

Comments to this Manuals

Related products and manuals for Security access control systems Menvier Security TS700